Unable to connect to wifi

[leon-uhs]

touch /boot/wifi.sta
echo "My WiFi" | tee /boot/wifi.ssid
echo "Pa$$w0rd" /boot/wifi.pass

LicheeRvnano-W Executing the above command cannot connect to wifi.
Using is licheervnano-e_sd.img

[scpcom]

I changed the WiFi configuration, please try v1.8.15 or later:
https://github.com/scpcom/sophgo-sg200x-debian/releases/download/v1.8.15/licheervnano-e_sd.img.lz4

[shiluo0827]

我使用licheervnano-e_sd.img 1.8.16 ,wifi依然无法使用。

[leon-uhs]

我使用licheervnano-e_sd.img 1.8.16 ,wifi依然无法使用。

我的可以，离wifi近点。

[shiluo0827]

我使用licheervnano-e_sd.img 1.8.16 ,wifi依然无法使用。

我的可以，离wifi近点。

root@licheervnano-04e3:/bin# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: end0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 48:da:35:6f:04:e3 brd ff:ff:ff:ff:ff:ff permaddr 7a:64:7e:f3:9b:a9
altname enx7a647ef39ba9
3: tunl0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/ipip 0.0.0.0 brd 0.0.0.0
4: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr c24d:9fc3:4faf::
5: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 48:da:35:6d:04:e3 brd ff:ff:ff:ff:ff:ff
inet 10.4.228.1/24 scope global usb0
valid_lft forever preferred_lft forever
inet6 fe80::4ada:35ff:fe6d:4e3/64 scope link
valid_lft forever preferred_lft forever

只能看到usb0，离wifi不到1米的距离。

[usb-i2c-spi]

能够使用nmtui联网WiFi呢？

[shiluo0827]

root@licheervnano-04e3:/etc/init.d# ./S30wifi restart

Usage:
kill [options] [...]

Options:
[...] send signal to every listed
-, -s, --signal
specify the to be sent
-q, --queue integer value to be sent with the signal
-l, --list=[] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).

Usage:
kill [options] [...]

Options:
[...] send signal to every listed
-, -s, --signal
specify the to be sent
-q, --queue integer value to be sent with the signal
-l, --list=[] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).
wpa_supplicant: no process found
./S30wifi: 162: airmon-ng: not found
wifi mode: sta
ssid: Xiaomi_1BC5
wifi.pass: qiaoli520

airmon-ng这个没有啊，所以wifi无法启动。如何联网呢？

[scpcom]

Sorry that I can not help you currently with this.
WiFi is working on all of my 3 devices (Lichee RV Nano W, Milk-V DuoS and NanoKVM PCIe) with this image and it is hard to test If I can not reproduce this.

Does it work with the original image from Sipeed?
Maybe I will take a look at the original image if I have time and sync all WiFi related settings/code again.