How to add the neuroflight repo to your gymfc environment?

[NahomGebremeskel]

If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.

Hi Will,
Sorry for asking silly questions, but from some issues in gymfc, you told some guys to use the neuroflight repo to train your neuro-network (RL algorithm). I only see the repo but no detail installion procedure.

I really appreciate for your constant replies.
Thanks!!!

Please consider using other user support options such as asking the manufacturer of the hardware you are using, RCGroups: https://rcgroups.com/forums/showthread.php?t=2464844, or Slack: https://slack.betaflight.tech or other user support forums & groups (e.g. facebook).

If you believe there is an issue with the firmware itself please follow these steps:

1. Describe your problem;
2. Include ways to reproduce the problem;
3. Provide information about your flightcontroller and other components including how they are connected/wired;
4. Add the used configuration and firmware version;
5. Create a diff and post it here in a code block. Put ``` (three backticks) at the start and end of the diff block (instructions on how to do a diff: https://oscarliang.com/use-diff-not-dump-betaflight/); and
6. Remove this Text :).

[wil3]

Hi , I'm not sure I understand what you are looking for. Can you provide specific details? GymFC is the training environment to synthesize the neuro flight controller, while Neuroflight is the corresponding firmware.

Instructions for compiling the model trained by GymFC is in the Neuroflight readme.